If a wrestler needs to be replaced after a matrix bracket has been built, you'll need to remove the original wrestler, adjust the qualifying places, add the replacement wrestler, rebuild the bracket, and reapply the number scheme.

Step 1: Remove the Original Wrestler

1. Go to Left Menu > Participants.
2. Click Search and locate the wrestler.
3. Select the wrestler.
4. Click Delete Selected Participants.

Step 2: Update the Qualifying Places

1. Go to Operating > Weight Classes.
2. Select the appropriate weight class.
3. Move each remaining wrestler up one qualifying place as needed.
4. Click Save.

Tip

Click Qualifying Tournament at the top of the column to quickly sort the list.

Step 3: Add the Replacement Wrestler

1. Return to Participants.
2. Select Add Participant.
3. Enter the wrestler's information.
4. Click Add.

When prompted, select:

• Manually or Automatically: Manually
• Change Bracket Type if Needed: No
• Bracket Placement: No Seed
• Redraw: Nobody

1. Click Finish.
2. Type manual to confirm.

Step 4: Rebuild the Bracket

1. Go to Printing > Weight Classes.
2. Select the correct weight class.
3. Click Rebuild Bracket with Line X.
4. Type rebuild to confirm.
5. Open the Bracket to verify that it rebuilt correctly.

Step 5: Reapply the Number Scheme

1. Go to Operating > Number Schemes.
2. Select the affected number scheme.
3. Click Apply Selected Schemes.
4. Select Unfreeze Existing Bouts.
5. Type Apply to confirm.

Verify the Results

Confirm that:

• The bracket has been rebuilt correctly.
• Bout numbers are correct.
• The replacement wrestler appears in the proper position.